automatic spray painting line for wood products
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||35 Days|
|Productivity:||2000pcs per day|
|Brand:||Heng Yi Jia|
|Place of Origin:||China|
|Supply Ability:||5000sets per year|
Model No.: HYJ-37
Type: Coating Production Line
Airflow Direction: Cross-flow Type
Heating Mode: Electric
Paint Mist Treatment: Wet-type
One side of the bottom 1, scraping process: water cement, grinding, polishing, spray, spray transparent primer colored transparent surface grinding, tofo. 2, product positioning: low-grade products. 3, advantages: simple process, low cost in wood coating, tofo has obvious defects in the case of using wood ash fill water, colored transparent face with deep color coating, can effectively cover the substrate defects. Uniform color. 4, disadvantages: the product does not have permeability, can not see the natural texture of wood texture, the effect of the entire painting is similar to do in the actual effect of the medium density board paint. Because only the first primer, product filling is not good, sag resistance is not good, prone to the film surface with wave like Wen's ups and downs, greatly affect the overall beauty products. It is the most time consuming, the labor intensity is big, the dust is big, causes the grinding work to be difficult to please.
Two: two bottom side (including water cement type), 1 process: water cement, grinding, spray scraping, sanding, transparent primer spray surface polishing, color transparent transparent primer, grinding, spray tofo. 2, product positioning: medium and low. 3, advantages: the coating process is relatively simple, low cost, better than a process filled with anti depressed. 4, disadvantages: the permeability of the product is not very good, the sense of hierarchy is not strong, can not be a good indication of the natural texture of wood and beauty. The intensity of water ash is large and the ash is large. 5 suggestions: (1) the wood water cement into "colored water ash"; (2) put into use colored transparent spray paint color repair oil repair color, light grinding, and then spray the transparent paint. This will greatly enhance the permeability and the level of the product, so that the texture of the wood can be more clearly demonstrated, and the overall cost will not increase the number of.
Three: three at the end of 1, a process: white, transparent primer, spray polishing grinding, grinding, spray color, light repair varnish, transparent primer, grinding polishing spray, spray, transparent primer. 2, product positioning: medium and high grade products. 3, advantages: good permeability, can clearly show the natural texture of wood. The construction of water ash is omitted, and the intensity of grinding is reduced. 4, disadvantages: high cost, the process has not been simplified, if it is a deep wood eye material, three primer can not do a good fullness. If the material of the wood texture is fine, can enhance the effect of wood texture (only true performance).
5 suggestions: (1) if the material wood eye deep, second primer can be used in wet operation; (2) can also put second primer by spraying into the coating, which not only greatly save the cost, better coating effect can be obtained. Four: the bottom surface coloring, color repair process: 1, tofo, sealing, grinding, grinding bottom spray cleaning, spray, PU glaze transparent primer, transparent primer, grinding polishing spray, spray priming, grinding, transparent color repair, light grinding, spray varnish. 2, product positioning: high-end products. 3, advantages: with a very good permeability, sense of hierarchy (stereo), even if the texture of the wood itself is not clear enough, through the above process operations, but also to show the texture more clearly. 4, disadvantages: high cost, long working hours. 5 suggestions: (1) if the wood texture clear, very aesthetic, not the bottom color (such as Sapele veneer, direct transparent primer, its wooden eyes emit a red flash effect, very beautiful; but if you do not show the bottom coloring process is the effect.); (2) the end of the coloring process, surface color can be light, so layering, better permeability.
Wood spray painting line, wood spray painting equipment, wood spray painting machine, wood, automatic spraying line, spraying machine, equipment complete, automatic paint supply system, UV oven, electrostatic dust box, water POON counters, PLC automatic touch control screen. At the same time, this is also a multi-functional small spray equipment, can be suitable for spraying a variety of products and the opposite sex. Six spray gun spraying line formulated according to the requirements of [product] the number of spray gun spraying preparation, when three spray products are the three branches of spray gun [when product reverse position can be adjusted on], spraying does not stay dead. We also use the low pressure gun, you can save the cost of preparation of large Air Compressor, we use uniform spray gun from Japan imported gun, the spraying effect is excellent for you.
Shenzhen Heng Yi Jia Technology Co., Ltd. has focused on paint spraying equipment for over20 years in China. We started as a small operation, but now have become one of the leading painting line suppliers in the coating industry in China.
Today,Shenzhen Heng Yi Jia Technology Co., Ltd. has been one of the top producers of quality automatic spraying line and new technologies, such as: automatic paint spraying line, UV paint spraying line(uv lines), spray chrome line, mini auto painting line, spray chrome equipment and accessories of coating equipment of vacuum metallizing machine(metallizer), Automatic UV plating vacuum line, spray booth, coating chain, UV curing oven, automatic spray chrome equipment&line, spray powder coating line & equipment and so on.
Shenzhen Heng Yi Jia Technology Co., Ltd. is located in the China The beautiful coastal city-Shenzhen. As a global supplier in auo paint spraying line, UV paint spraying line, mini auto painting line, spray chrome line, spray chrome equipment and accessories of coating equipment. Heng Yi Coating Technology is to create added value for customers around the world.
Our products includes the following:
1, Auto paint spraying line
2, UV paint spraying line
3, Mini auto paint spraying machine
4,spray chrome machine with formula.
5.vacuum coating machine/vacuum metallizer
6. Accessories of coating equipment
We supply coating products all over the globe to a wide range of companies worldwide, ranging from large multinational organizations to small individual companies.
Spray painting plant for Industry use are widely used in the following industry, such aspackage coating plant:
--- Glass packages coating for cosmetics, perfume, wine, caps, bottles and other parts
---Painting plant for product paint surface finishing
---Vacuum coating plant
Spray chrome equipment with formula which from our second production line, are widely used for cmetallzing oating, and vacuum coating machine etc.
We always feel that all success of our company is directly related to the quality of the products we offer. They meet the highest quality requirements as stipulated in ISO9001, ISO14000:14001 quality control system, CE certificate, etc.
We are capable of mixing and producing an paint spraying line, UV lines and offer some of the most advanced manufacturing capabilities available, including vacuum coating machine, mini paint spray machine and spray chrome machine etc.
We have customers from both domestic market and oversea market.Heng Yi Jia Technology Sales managers can speak fluent English for good communication. Our main sales market:
China : 50%
Our service for coating equipment.
Besides our existing molded spray painting line, auto paint spray line, uv paint line, mini paint spray line, spray chrome machine, also can produce other coating line according to the drawings from our customers. We control the product quality critically for every step during the manufacturing from custom coating equipment. We offer technical support that is second to none. installation at local.
- Company Name: Shenzhen Heng Yi Jia Technology Co., Ltd.
- Representative: Wu Juhua
- Product/Service: Spray Painting Production Line , Automatic Spray Coating Line , UV Spray Coating Line , Vacuum Metallizer , small automatic spray coating line , semi-automatic spray coating line
- Capital (Million US $): 50万
- Year Established: 2013
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: C11 Lian Xing Industrial Park Fu Rong B Zone Sha Jing BaoAn District Shenzhen China
- Contact Person: Ms. Demi Wu
- Tel: 86-755-29492864
Premium Related Products